Hardware Overview
- Power supply: DC24V/2A
- Chip: 32‑bit ARM embedded, 128MB Flash, 512K RAM
- Axes: 4‑axis control X‑Y‑Z‑U；Z‑axis for dual‑inter‑moving‑head / rotary‑knife lifting；U‑axis for feeding / platform lifting. Max pulse frequency:166KHz
- Laser channel: 2‑independent laser output channels, TTL signal, PWM 1K‑100KHz, duty‑cycle 0‑100% adjustable. Dual‑laser for synchronized dual‑moving‑head CO₂ machine, support glass tube & RF laser, dual water‑protection input.
- I/O:12‑way opto‑isolated input,6‑way output
- Display:4.3‑inch TFT LCD (480×272)
- Communication: USB2.0,100Mbps Ethernet, U‑disk offline read‑write, WIFI(AP / Station mode)
- Extra functions: Real‑time clock, machine lock‑out,7‑segment S‑curve acceleration/deceleration, backlash compensation, small‑circle speed‑limit.
- Supported features: Dual‑inter‑moving laser heads(single‑belt / double‑belt dual‑head machine), power‑fail resume cutting, rotary engraving, rotary‑knife cutting, Mark‑point visual positioning, double‑platform switch, auto‑feed, auto‑focus, foot‑switch, cover‑open protection, firmware upgrade, runtime statistics.
- Multi‑language: Simplified Chinese, English, Traditional Chinese, Korean, Russian, Italian, Spanish, Portuguese, Vietnamese.
Key Panel Operation
- Offline work:
.OUTfile from internal memory / FAT32 U‑disk, max 500 files storage. - Dual‑laser independent layer parameters, real‑time modify power/speed during cutting; frame preview, single‑axis jog.
- Admin password for parameter backup, restore, factory reset, time‑limited machine lock.
- Rotary‑knife module: Manual / auto tool‑setting, spindle & press‑roller control, switch between laser / rotary‑knife mode.
- Special for dual‑moving‑head inter‑shift laser cutting machines.
Common Troubleshooting
Consistent with TL‑A3；extra attention for dual‑head machine: check Z‑axis wiring and dual‑laser channel wiring.
