Hardware Overview
- Power supply: DC24V/2A
- Chip: 32‑bit ARM embedded, 128MB Flash, 512K RAM
- Axes: 3‑axis control (X, Y, Z/U multiplex port)；Z/U can be configured for rotary knife lifting or material‑feeding / platform lifting. Max pulse frequency:166KHz
- Laser channel: 1‑way laser output, TTL signal, PWM 1K‑100KHz, duty‑cycle 0‑100% adjustable. Support CO₂ glass tube & RF laser source, water‑protection input.
- I/O: 9‑way opto‑isolated input, 3‑way output
- Display: 4.3‑inch TFT LCD (480×272)
- Communication: USB2.0, 100Mbps Ethernet, U‑disk offline file reading/writing, WIFI(AP / Station mode)
- Extra functions: Real‑time clock, machine lock‑out function, 7‑segment S‑curve acceleration/deceleration, backlash compensation, small‑circle speed limit.
- Supported features: Power‑fail resume cutting, rotary engraving, rotary knife cutting, Mark‑point visual positioning, auto‑focus, foot‑switch trigger, cover‑open safety protection, firmware upgrade, working‑hour statistics.
- Multi‑language: Simplified Chinese, English, Traditional Chinese, Korean, Russian, Italian, Spanish, Portuguese, Vietnamese.
Key Panel Operation
- Offline work: Run
.OUTfiles from onboard memory or FAT32 U‑disk. Max 500 stored files. - Adjustable parameters: Layer‑based laser power / speed / gas assist; real‑time adjust speed & power during processing; frame preview; single‑axis jog movement.
- Admin password for parameter backup / restore / factory reset / time‑lock machine.
- Rotary‑knife function: Manual / auto tool‑setting, spindle & press‑roller control, tool switch between laser and rotary knife.
Common Troubleshooting
- No power‑on reset: Check 24V power supply, short‑circuit in wiring, mainboard damage.
- Abnormal laser output: Check PWM polarity, water‑protection signal, laser power source setting.
- PC connection failure: Check USB driver, device ID, grounding, same network‑segment for LAN/WIFI.
- U‑disk error: Format U‑disk to FAT32.
- Out‑of‑range alarm: Modify machine dimension parameters, reset origin positioning point.
