1325 Large Format CO2 Laser Cutting Bed
Product Introduction
The 1325 high-power laser cutting bed is equipped with 150W/300W/450W/600W high-power folded CO2 laser tubes and a dedicated water cooling system. It features a 1300×2500mm working area and a heavy square-tube gantry frame with outstanding rigidity. It can stably complete large-format cutting and engraving of thick non-metal materials such as thick acrylic, solid wood boards and bark. With strong laser penetration, it can cut through thick boards in one pass without rework. The water cooling system maintains stable temperature to support long-hour continuous mass production. It is widely used in advertising, woodworking and craft gift factories for bulk thick material processing.
Machine Dimensions
| Item | Parameter |
|---|
| Working Area | 1325 (1300×2500mm), customized size available |
| Machine Structure | Heavy-duty integrated frame |
| Working Mode | Positioning cutting |
| Compatible File Formats | DXF, AI, PLT, GERBER (special for circuit boards) |
| Power Supply | AC220V 50Hz, Rated Power: 3500W |
Integrated Structure
Technical Parameters
| Item | Parameter |
|---|
| Laser Type | CO₂ Laser Tube |
| Laser Wavelength | 10600 nm |
| Laser Power | Optional: 150W / 300W / 450W / 600W |
| Cutting Accuracy | ±0.01 mm |
| Repeat Positioning Accuracy | ±0.005 mm |
| Minimum Cutting Line Width | ≤0.02 mm |
| Cooling System | Water Cooling |
| Control System | Industrial Motion Control System |
Optional Versions
| Feature | Standard Belt Drive Model |
|---|
| Synchronous Belt Transmission Structure | X/Y axis driven by rubber timing belts and stepper motors. Low operation noise and lower purchase cost, high cost performance for entry-level users. |
| Suitable Processing Scenarios | Suitable for small & medium batch, medium-low speed processing, including advertising letters, thin wood boards, acrylic signs, bark crafts and conventional engraving & cutting. |
| Feature | High-speed Rack & Pinion Drive Model (Premium Version) |
|---|
| Precision Hardened Rack & Pinion Servo Drive | Adopts hardened precision rack and servo motors. Minimal transmission clearance, strong rigidity and no stretching deformation. |
| High Speed & Mass Production | Cutting speed increased by more than 40% compared with belt-drive machines, greatly saving material preparation time for thick boards. Ideal for continuous full-sheet mass production in factories. |
| Long-term Stable Precision | No elastic deformation in transmission system. Stable repeat positioning accuracy under 24-hour continuous operation. Consistent cutting edges for thick wood and thick acrylic, no shifting or misalignment. |
Product Features
| Feature | Description |
|---|
| High-power Folded Laser Tube with Multiple Power Options | Optional 150W/300W/450W/600W folded laser tube. Concentrated beam energy and strong penetration. Thick acrylic and solid wood can be fully cut in one pass with smooth, burr-free edges. It delivers much higher cutting thickness and speed than ordinary laser tubes. The folded optical design achieves better light gathering effect, low energy loss and longer service life. |
| Dedicated Water-cooled Laser Head for High Power | Equipped with a special circulating water cooling head for high-power tubes. Water circulation fully cools the laser tube and optical lenses to continuously dissipate heat, slow down laser tube attenuation. The machine can run non-stop for 24 hours with stable power output, avoiding incomplete cutting and burning caused by overheating. |
| 1325 Large-format Working Table | 1300×2500mm extended worktable supports processing large full sheets without splitting and splicing. Perfect for whole acrylic sheets, wood panels and bark raw materials, improving material utilization. |
| Heavy-duty Gantry Stable Frame | Thickened welded square-tube integrated frame with precision linear guide rails. No vibration during high-speed cutting, no shifting when processing thick materials. High repeat positioning accuracy and long service life without deformation under continuous production. |
| Blade Worktable for Thick Materials | High-density blade support table keeps the bottom of the workpiece suspended. Prevent sticking and burning on the back side of boards. Suitable for long-term processing of heavy hard materials, easy for residue cleaning. |
| High-power Dust & Fume Exhaust System | Matched with powerful exhaust fan to quickly remove wood chips and smoke while cutting wood and bark. Reduce yellowing and burnt edges, keep the working environment clean. |
Applicable Materials
| Category | Materials |
|---|
| Hard Thick Boards | Thick acrylic, plexiglass, MDF, solid wood, paulownia, pine, plywood, bark, bamboo board, thick PVC sheet, two-color board |
| Paper Packaging Materials | Thick cardboard, corrugated board, foam board, thick EVA foam |
| Soft Craft Materials | Leather, felt, non-woven fabric and other thin non-metal accessories |
Application Industries
| Category | Application Scenarios |
|---|
| Advertising & Signage | Thick acrylic luminous letters, advertising signs, display stands, guide sign cutting and engraving |
| Wood Crafts | Solid wood crafts, wooden ornaments, photo frames, gift boxes, wood prints, bark art decorations |
| Furniture Industry | Small furniture carving, wood veneer cutting, wooden soft furnishing accessories |
| Cultural & Creative Handicrafts | Bark paintings, bamboo & wood carved pendants, DIY wooden models, craft ornaments |
| Gifts, Crafts & Toys | Plush toys, embroidery patches, felt crafts, fabric ornaments |
| Packaging Industry | Thick paper gift boxes, foam inserts, wooden packaging base cutting |
| Decorative Building Materials | Indoor wooden decorative mouldings, bark art background panel processing |
