CO₂ Laser Tube Beam Quality Inspection Standards and Testing Methods
The beam quality of a CO₂ laser tube (hereinafter referred to as the "laser tube") is an important factor affecting its cutting speed. Many laser tube return and replacement cases are related to beam quality issues. However, the standards and testing methods used to evaluate laser tube beam quality can easily lead to disagreements and disputes between customers and manufacturers.
To ensure that beam quality issues can be identified quickly, efficiently, accurately, and conveniently, the following inspection standards and testing procedures are established.
1. Clean the Optical Components and Align the Laser Beam
Before evaluating laser tube beam quality, clean the laser tube output window and the machine's A, B, and C mirrors thoroughly using absolute ethanol (anhydrous alcohol).
Adjust the laser beam to ensure that it passes through the center of the A, B, and C mirrors.
2. Test Beam Quality at the Recommended Working Distance
For conventional laser machines (excluding fabric cutting machines), the effective optical path length is generally between 600 mm and 3,500 mm. During normal operation, the most frequently used processing area is usually located approximately 1,500–2,000 mm from the laser tube output window.
To improve processing efficiency and minimize cutting differences between near-field and far-field positions, HANLEI optimizes the laser tube's beam quality for a working distance of 1,500–2,000 mm.
Therefore, when evaluating the beam quality of HANLEI laser tubes, testing must be performed at a distance of 1,500–2,000 mm from the laser tube output window. Testing directly at the output window is not an acceptable evaluation method.
3. Test Beam Quality Without Removing the Laser Tube
Modern laser machines generally use high-reflectivity mirrors. As long as the mirrors are clean and free from contamination and the optical path is properly aligned, the mirrors generally do not significantly affect the laser tube's beam mode.
Therefore, when troubleshooting at the customer's facility, the laser tube beam quality can be tested through the machine's existing optical path. It is not necessary to remove the laser tube from the machine for testing.
4. Standard Beam Quality Testing Procedure
When testing laser tube beam quality, follow these steps:
Adjust the laser tube operating current to 25 mA.
Prepare a piece of 5 mm-thick acrylic (PMMA).
Position the acrylic sheet 1,500–2,000 mm from the laser tube output window, generally in front of the C mirror.
Place the acrylic sheet perpendicular to the laser beam optical axis.
Fire the laser to burn into the acrylic. When the laser is about to penetrate the material, observe the resulting burn mark.
The burn mark obtained using this method represents the laser tube's beam spot.
Evaluate beam quality based on the following characteristics:
Taper: The shape and degree of taper in the burn mark.
Shape: Whether the beam spot has a regular and consistent shape.
Roundness: Whether the spot is circular and symmetrical.
Size: The overall dimensions of the beam spot.
If acrylic is not available, an alternative test can be performed using a short laser pulse, generally 1–2 seconds, to create a visible beam spot outline on a hard material such as cardboard or wood. The resulting outline can then be used to assess beam quality.
5. Reporting Beam Quality Issues
If a laser tube is suspected of having a beam quality problem, please send the following information to HANLEI's after-sales service team for verification:
Clear photos or videos of the abnormal laser burn mark.
Photos of the laser tube product label.
Relevant testing information, including the operating current and testing distance.
Our after-sales service team will review the submitted information and provide timely feedback and assistance.